More

    iPhone 13 Pro Max and 13 Mini: here's a first look at their supposed designs

    Videographer EverythingApplePro provides renderings of intended designs of the iPhone 13 Pro Max and iPhone 13 mini. The first city would in particular be entitled to a larger photo module.

    iPhone 13 Pro Max et iPhone 13 mini

    Render of iPhone 13 Pro Max and iPhone 13 mini // Source: EverythingApplePro

    September is only five months away and this is reflected in particular with the number of more or less precise rumors that are spreading on the Internet about future Apple smartphones. It is in this context that the video of YouTuber EverythingApplePro comes out.

    The videographer was able to create dummy models and 3D renderings of the iPhone 13 Pro Max and the iPhone 13 mini based on various sources.

    A thicker iPhone 13 Pro Max for a larger photo block

    Regarding the iPhone 13 Pro Max, we note in particular that the latter could be thicker by 0.9 mm than its predecessor, or 7.65 mm for the iPhone 13 Pro Max against 7.40 mm for the iPhone 12 Pro Max.

    Render of the iPhone 13 Pro Max photo block

    Render of the iPhone 13 Pro Max photo block // Source: EverythingApplePro

    As for the photo unit on the back, the latter would also be subject to changes. Apple would enlarge in length, width and thickness the module of the future iPhone 13 Pro Max. According to EverythingApplePro, these changes are linked to the integration of a larger LiDAR sensor.

    Photo block length Photo block width Photo block thickness
    iPhone 13 Pro Max 37,62 mm 36,56 mm 3,65 mm
    iPhone 12 Pro Max 34,23 mm 31,79 mm 2,78 mm

    As you can see through this table, the iPhone 13 Pro Max could get a bigger photo block. To this day, this remains only speculation, it will be necessary to wait a few more months to get to the bottom of it.

    Moreover, this same video talks about the iPhone 13 mini and also discusses changes in its dimensions.

    Slight changes for the iPhone 13 mini

    Good that iPhone 14 mini may not see the light of day in 2022, the 2021 iPhone vintage would have the right to its mini version. The iPhone 13 mini would also be 0.26mm thicker with a larger, thicker, but shorter photo block than the iPhone 12 mini (-0.14mm).

    iPhone 13 mini

    Rendu de l'iPhone 13 mini // Source: EverythingApplePro

    The changes would be smaller than the iPhone 13 Pro Max.

    Photo block length Photo block width Photo block thickness
    iPhone 13 mini 28,26 mm 28,27 mm 2,50 mm
    iPhone 12 mini 28,40 mm 25,21 mm 1,51 mm
    Differences between iPhone 13 mini and iPhone 12 mini -0,14 mm 3,06 mm 0,99 mm

    Good things come to those who wait for

    In terms of design, the change would not be obvious since Apple realizes a real aesthetic turn every three years or so. What could potentially change is more on the characteristics side with the possible arrival of a panel with refresh rates of 120 Hz or increased storage capacity for the iPhone 13. Some rumors also evoke the possible return of Touch ID due to the pandemic – the masks we have to wear make Face ID less relevant.

    All of this information is obviously not to be taken at face value. You will have to wait until September to see Apple confirm or not the information around the iPhone 13. Moreover, the silicon crisis that certain manufacturers suffer would not touch Apple, which does indeed plan to release its future iPhones on time. Waiting, meet on April 20 at 7 p.m. for the keynote in order to welcome the novelties concocted by Apple for the beginning of the year 2021.


    Source: Smartphones – Frandroid by www.frandroid.com.
    The article has been translated based on the content of Smartphones – Frandroid by www.frandroid.com.
    We stand by the rights of the original author of the post, no matter what. We always respect and prioritize the copyright of the content and always include the original link of the source article. If the author of the original article has any issue with it, just leave a report below, we’ll edit it or delete it. Whatever it takes. We will make it right as quickly as possible to protect the rights of the author.
    Thank you very much! Best regards!




    Recent Articles

    Black Shark 4 Pro remains number 1 on the AnTuTu list

    The list is entirely dominated by flagship models Snapdragon 888 which is quite interesting. This ranking saw the Black Shark 4 Pro maintain its...

    Samsung SmartTag – Review

    I received a Samsung SmartTag from the first generation and left it in the box for a few months, although I'm the type who...

    New WhatsApp Policy – Either accept or suffer the consequences

    The company has set May 15 as a deadline for all users to accept this new policy. With new terms and conditions, WhatsApp ensures that...

    G.SKILL ENKI 360 – test of efficient, but not perfect AIO

    G.SKILL ENKI 360 - test of efficient, but not perfect AIO G.SKILL we mainly associate them with great RAM modules that not only look good,...

    Tesla cars can be hacked from a drone

    A Tesla car is like a computer with wheels. And who says computer, also says the risk of piracy. The car manufacturer is not...

    Related Stories

    2 Comments

    Leave A Reply

    Please enter your comment!
    Please enter your name here

    Stay on top - Get the daily news in your inbox